Custom Brass Shelving: Made to Your Exact Dimensions
Every shelving system we make is custom — there are no standard sizes, no stock units, and no compromises on dimensions. You specify the exact width, height, depth, number of shelves, mounting type, pipe diameter, and finish. We manufacture to those specifications in our CNC workshop in Istanbul and ship to the US and Canada in approximately 10 days from order.
This page explains how our custom brass shelving systems are built, how the fittings work, and what to expect from the process.
How Custom Brass Shelving Is Built
Our shelving systems are constructed from two components: solid brass rods (the structural pipes) and solid brass fittings (the connectors that join the rods together and anchor the system to walls, ceilings, or floors). Every component is CNC-machined from 100% solid, unlacquered brass — no plating, no coating.
The rods and fittings are specified to your exact dimensions and manufactured together as a system. When they arrive, all components are disassembled and ready to install. Assembly requires no specialist tools — fittings are secured to rods using set screws.
The Fittings — How Each One Works
Understanding which fitting does what is the key to specifying a custom brass shelving system correctly. Here is a clear description of each fitting in our range:
Type A — T-connector. The main pipe runs continuously through the fitting (pass-through). A second pipe enters from the side at 90° and terminates inside the fitting. Used wherever a single branch extends from a continuous pipe run in one direction only.
Type B — Cross connector. Two pipes pass through each other at 90°. Both pipes run continuously through the fitting and exit the other side. Used wherever two pipe runs cross and both need to continue past the junction point.
Type C — Shelf junction connector. The horizontal pipe passes completely through the fitting. Two vertical pipe sections enter from above and below, each terminating inside the fitting at the horizontal pipe. The most commonly used fitting in multi-shelf brass shelving systems — it connects horizontal shelf rods to vertical structural rods.
Type D — Base foot. One pipe enters from above and terminates inside. The wide circular base plate sits on a floor or counter surface without fastening — no mounting holes. Used as the lower support for freestanding and counter-resting systems.
Type E — Wall, ceiling, or floor flange. One pipe enters and terminates inside. Four countersunk holes in the base plate allow permanent fastening to a wall, ceiling, or floor. The primary anchor fitting for all wall-mounted and ceiling-mounted shelving systems.
Type F — Wall-mounted 90° connector. Mounts permanently to the wall via four screws. A horizontal shelf rod enters from the front at 90° and terminates inside. A vertical structural rod passes through the back of the fitting independently. Used where a horizontal rod branches from the wall at a point where the vertical rod also continues past.
Mounting Configurations
Wall-mounted. The most common configuration. Type E flanges anchor the system to the wall. Type C fittings connect horizontal shelf rods to vertical structural rods at each shelf level. The system is fully supported by the wall anchors.
Ceiling-mounted. Type E flanges anchor vertical rods to the ceiling. Shelf rods branch horizontally from the vertical rods at each shelf level using Type C fittings. The system hangs from the ceiling — no wall contact required. The defining aesthetic of French bistro bar shelving.
Ceiling and counter. Type E flanges anchor the system at the ceiling. Type D base feet rest on the counter below — no floor or wall fastening required. Widely used in bar back shelving where the unit sits on the bar surface and is stabilized at the ceiling above.
Ceiling and floor. Type E flanges anchor at the ceiling. Type E or Type D fittings anchor or rest at the floor. The vertical rods are tensioned between ceiling and floor — no wall attachment. Used for room dividers and freestanding display structures.
Wall and floor. Type E flanges anchor to the wall at the back. Type D base feet rest on the floor at the base. Maximum stability for tall, heavy-load shelving — common in pantries, retail, and library-style installations.
Counter and wall. The system rests on a counter below and anchors to the wall above using Type F fittings. Common for kitchen backsplash shelving and bar back displays where the counter provides the lower base.
Pipe Diameters
15/32" (12mm) — The slimmest profile. Creates a refined, lightweight appearance. Popular in residential kitchens, boutique retail, and spaces where visual lightness is important.
5/8" (16mm) — The most widely specified diameter. Strikes the right balance between visual weight and structural rigidity. Works across residential, hospitality, and commercial contexts.
1" (25mm) — The most substantial profile. Creates a bold, architectural presence. Used in large-scale installations and spaces where the pipe system is meant to be a prominent visual feature.
Finishes
Unlacquered Brushed (Satin) Brass — matte, warm, directional texture. Develops a soft patina over time. Less sensitive to fingerprints than polished. The most commonly specified finish for residential and hospitality shelving.
Unlacquered Polished Brass — high-gloss, mirror-like surface. Highly reflective and visually striking. Develops a warmer, richer tone as it ages. Common in retail and statement installations.
Both finishes are solid, unlacquered brass — the metal develops a natural patina in response to its environment over time. This is the defining characteristic of solid brass and the primary reason it is specified over lacquered or plated alternatives.
What Is and Isn't Included
Our systems include all brass structural components — rods cut to length, fittings, and flanges. Shelf surfaces (glass, wood, marble, stone) are not included and are customer-supplied. We provide the exact glass dimensions after your order is confirmed so you can order from your local glass supplier.
The Process
You can start two ways:
Configurator — specify your dimensions, mounting type, pipe diameter, and finish online and see a real-time price. When ready, proceed directly to checkout. We send a technical drawing for your approval before production begins.
Free quote — send us your dimensions and project details. We prepare a technical drawing and itemized quote within 24 hours, at no charge.
Production takes 7 days from order confirmation. Shipping to the US and Canada via UPS Air takes 3–4 days.
Frequently Asked Questions
What is the maximum size for a custom brass shelving unit?
Each bay can be up to 45" wide. For wider installations, multiple bays are combined — there is no upper limit on total width. Height and depth are fully customizable to your space.
Can I specify different shelf depths within the same unit?
Yes. Each shelf level can have a different depth if required. This is specified at the quote stage — our free quote process accommodates non-standard configurations that the online configurator may not cover.
Do glass shelves come included?
No — we don't ship glass due to the risk of breakage in transit. Once your order is confirmed, we provide the exact glass dimensions and specifications so you can order from your local glass supplier. We make sure you have everything you need to get the right cut.
Who typically orders custom brass shelving?
Our customers are primarily interior designers, architects, contractors, and hospitality operators specifying for residential renovations, restaurant fit-outs, retail spaces, and hotel interiors. We also work directly with homeowners who know exactly what they want.
Is a technical drawing provided before production?
Yes — for every order, we send a technical drawing showing the exact configuration, dimensions, and fitting layout for your review and approval. Production begins only after you confirm the drawing is correct.